اهمیت انتخاب مدل رقومی ارتفاعی مناسب در مدیریت و حفاظت منابع خاک و آب (مطالعه موردی: سد تهم، استان زنجان)

Abramov, O., and McEwan, A. (2004). An evaluation of interpolation methods for Mars Orbiter Laser Altimeter (MOLA) data. International Journal of Remote Sensing, 25(3), 669–676.

Ashrafi, A., and Alimi, M. A. (2014). The comparison of different procedures for the preparing of digital elevation model, case study: Noferest watershed, Birjand township, South Khorasan province. Geography and Urban Planning, 4(13), 119-140.

Arun, P. V. (2013). A comparative analysis of different DEM interpolation methods. The Egyptian Journal of Remote Sensing and Space Science, 16(2), 133–139.

Booth, B. (2000). Using ArcGIS 3D Analyst, GIS by ESRI. Environmental Systems Research Institute, Inc., USA.

Childs, C. (2004). Interpolating surfaces in ArcGIS spatial analyst, Arc User. ESRI Education Services, pp. 32–35.

Datta, P. S., and Kirchner H. S. (2010). Erosion relevant topographical parameters derived from different DEMs— A comparative study from the Indian lesser Himalayas. Remote Sensing, 2(8), 1941-1961.

Draper, N. R., and Smith, H. (1998). Applied regression analysis. Wiley InterScience Publisher, 697p.

Granger, C. W. J., and Pesaran, M. H. (2000). Economic and statistical measures of forecast accuracy. Journal of Forecasting, 19(7), 537– 560.

Garg, R. D., and Mukhopadhyay, A. (2013). Evaluation of vertical accuracy of open source digital elevation model (DEM). International Journal of Applied Earth Observation and Geoinformation, 21, 205–217.

Her, Y., Heatwole, C. D., and Kang, M. S. (2015). Interpolating SRTM elevation data to higher resolution to improve hydrologic analysis. Journal of the American Water Resources Association, 51(4), 1072–1087.

Hirano, A., Welch, R., and Lang, H. (2003). Mapping from ASTER stereo image data: DEM validation and accuracy assessment. Journal of Photogrammetry and Remote Sensing, 57(5), 356-370.

Hirt, C., Filmer, M. S., and Featherstone, W. E. (2010). Comparison and validation of the recent freely-available ASTER-GDEM ver1, SRTM ver4.1 and GEODATA DEM-9S ver3 digital elevation models over Australia. Australian Journal of Earth Sciences, 57(3), 337-347.

Hosseinzadeh, S. R., and Nadafsangani, M. (2013). Assessing the accuracy of digital elevation models derived from contour line maps and comparative comparison with Satellite digital elevation models. PhysicalGeography ResearchQuarterly, 45(1), 71-86.

Jarvis, A., Rubiano, J., Nelson, A., Farrow, A., and Mulligan, M. (2004). Practical use of SRTM data in the tropics: Comparisons with digital elevation models generated from cartographic data. International Center for Tropical Agricultural,WorkingDocumentNO. 198, 32p.

Jubin, T., Sabu, J., Thrivikramji, K. P., and Arunkumar, K. S. (2014). Sensitivity of digital elevation models: The scenario from two tropical mountain river basins of the western Ghats, India. Geoscience Frontiers, 5(6), 893–909.

Kamp, U., Bolch, T., and Olsenholler, J. (2003). DEM generation from ASTER satellite data for geomorphometric analysis of Cerro Sillajuhay, Chile/Bolivia. ASPRS Annual Conference Proceedings, Anchorage, Alaska.

Kamp, U., Bolch, T., and Olsenholler, J. (2005). Geomorphometry of Cerro Sillajhuay (Andes, Chile/Bolivia): Comparison of digital elevation models (DEMs) from ASTER remote sensing data and contour maps. Geocarto International, 20(1), 23-33.

Malczewski, j. (1999). GIS and multi criteria analysis. john wiely & Sons Publishers.

Mouratidis, A., Briole, P., and Katsambalos, K. (2010). SRTM 3” DEM (version 1, 2, 3, 4) validation by means of extensive kinematic GPS measurements: a case study from North Greece. International Journal of Remote Sensing, 31(23), 6205-6222.

Nikolakopoulos, K. G., Kamaratakis, E. K., and Chrysoulakis, N. (2006). SRTM vs. ASTER elevation products: comparison for two regions in Crete, Greece. International Journal of Remote Sensing, 27 (21), 4819-4838.

Oliviera, C. G., and Paradella, W. R. (2009). Evaluating the quality of the digital elevation models produced from aster stereoscopy for topographic mapping in the Brazilian Amazon region. Annals of the Brazilian Academy of Sciences, 81(2), 217–225.

Plasencia, S. E., and Villarán, F. R. (2012). SRTM 3" comparison with local information: Two examples at national level in Peru. Journal of Applied Geodesy, 6(2),75-81.

Sandip, M., Joshi, P. K., Mukherjee, S., Ghosh, A., Garg, R. D., and Anirban, M. (2013). Evaluation of vertical accuracy of open source digital elevation model (DEM). International Journal of Applied Earth Observation and Geoinformation, 21, 205–217.

Seibert, J., Stendahl, J., and Sorensen, R. (2007). Topographical influences on soil properties in boreal forests. Geoderma, 141(1-2), 139-148.

Sibson, R. (1981). A brief description of natural neighbor interpolation, interpreting multivariate data (Ed. Barnett V.), New York: John Wiley and Sons, pp. 21–36.

Soleimani, K., and Modallaldoust, S. (2008). Production of optimized DEM using IDW interpolation method (Case study; Jam and Riz basin, Assaloyeh). Journal of Applied Science, 8(1), 104-111.

Stack, E. (2010). Geographic information system. http://gis.stackexchange.com/

Strahler, A. N. (1957). Quantitative analysis of watershed geomorphology. Transactions of the American Geophysical Union, 38(6), 913–920.

Suwandana, E., Kawamura, K., Sakuno, Y., Kustiyanto, E., and Raharjo, b. (2012). Evaluation of ASTER GDEM2 in comparison with GDEM1, SRTM DEM and topographic-map-derived DEM using inundation area analysis and RTK-DGPS data. Remote Sensing, 4, 2419-2431.

Tachikawa, T., Hato, M., Kaku, M., and Iwasaki, A. (2011). Characteristics of ASTER-GDEM version 2. In: Geoscience and Remote Sensing Symposium (IGARSS), Vancouver, BC, pp. 3657–3660.

Tighe, M. L., and Chamberlain, D. (2009). Accuracy comparison of the SRTM, ASTER, NED, NEXTMAP USA digital terrain model over several USA study sites. In: Proceedings of the ASPRS/MAPPS Fall Conferences.

USGS. (2006). Shuttle radar topography mission (SRTM) 3 arc second (90 meter) –Description. Online Available at: http://seamless.usgs.gov/website/seamless/products/srtm3arc.asp.

Watson, D. F. (1992). Contouring: A guide to the analysis and display of spatial data. Oxford, UK. Pergamon press, 225.

Willmott, C., and Matsuura, K. (2005). Advantages of the mean absolute error (MAE) over the root mean square error (RMSE) in assessing average model performance. Inter Research, Climate Research, 30 (1), 79–82.

Wilson, J. P., Spangrud, D. J., Nielsen, G. A., Jacobsen, J. S, and Tyler, D. A. (1998). Global positioning system sampling intensity and pattern effects on computed topographic attributes. Soil Science Society of America Journal, 62, 1410-1417.